Ultrasonic Carburettor Cleaning Service
Using ultrasonic sound waves to clean carburettors is a far
superior method than using sprays or chemicals to remove old
fuel deposits and ground in grime.
The cleaning process is caused by microscopic air bubbles
imploding on the surface of the component like tiny explosions
caused by the high frequency sound waves in the ultrasonic bath.
All the holes and passages in the carburettors or any ware the
solution has contact with are cleaned.
No harsh or corrosive chemicals are used, only a mild detergent
is used to help breakdown the years of grime that has built up
over the years. Most carburettor problems are down to dirt and
grime or blocked passage ways, ultrasonic cleaning will restore
your carburettors performance back to as when they were new.
Ultrasonic cleaning cleans the whole carburettor inside and out
and removes dirt oil and stains etc but it will not remove
corrosion or restore the alloy to a as new appearance, basically
it will clean and remove all the grime, so as long as the
carburettors are in good serviceable condition they will perform
If the appearance of the carburettors is of importance the
ultrasonic cleaning service used in conjunction with our vapour
blasting service will restore the exterior aluminium to a better
than new finish which is ideal for that classic restoration
project see vapour blasting page.
To see our ultrasonic gallery please
Price Guide For ultrasonic cleaningSingle carburettor sent disassembled: £10
Twin carburettor sent disassembled: £20
Triple carburettor sent disassembled: £30
Bank of four carburettors sent disassembled: £40
If you want the carburettors stripped cleaned, checked and re
assembled back to factory settings add £15 per carburettor
provided the carburettors are in a serviceable condition. Worn
or faulty parts can be replaced with genuine parts if available
or for certain models Keyster carburettor rebuild kits.
Single carburettor sent assembled: £25
Twin carburettor sent assembled: £50
Triple carburettor sent assembled: £75
Bank of four carburettors sent assembled: £100
Ride In Ride Out ServiceIf you have a suspect carburettor problem we can perform a dyno
test at a discounted £15 to diagnose or pinpoint the cause of
the fault and offer a ride in ride out carburettor cleaning and
setup service which includes removal of the carburettors, strip
,clean, refit, balance and set the idle mixture with a gas
analyser. If remedial work is not carried out after the dyno
test the price for the test will be charged at £25.00 (for more
information see dyno page)
Price GuideFor removal, strip, clean, refit, balance and idle mixture set.
Single cylinder: £55
Twin cylinder: £80
Triple cylinder: £110
Four cylinder: £150
Projex Motorcycle Engineers
Unit 6 Spinners End Industrial Est,
Tel / Fax: 01384 633759